Build & Organize a Corner Shelving System

Unlike how most people think it is, it is not that hard to build and organize a corner shelving system. Given below is a list of items you would need to build and organize a corner shelving system:

ü  Wood planks with width either 7 inches or 12 inches

ü  Polyurethane, Varnish or other finish to seal wood shelves

ü  1/8^th of an inch drill bit

ü  Screws to attach standards to the wall

ü  Power Drill

ü  Shelving brackets in length 6 inches and 10 inches

ü  Shelving standards

ü  Wood stain, paint, primer

ü  1/8^th of an inch diameter dowels for joinery

ü  Flat fittings and poplar wood

As soon as you have all of these, you can look forward to building one for yourself. For the record, standards are those long white vertical strips on the wall. These can be anything ranging from bookcase strips such as a flat bookcase strip, tonk strips etc. These generally have notches in them meant for hooking in shelf supports, together known as shelving strips and brackets. These standards generally allow home owners to move shelves both up and down without the need to re-drill holes into the wall. Whatever your choice of standards be, be it the tonk strip or the bookcase strip, they must be attached to the wall by drilling screws through the occasionally placed screw holes into wall studs. It is generally advised that whenever one buys bookcase strip shelf supports or bookcase strips and supports, it be of durable quality as the standards have the responsibility of holding onto heavy shelves. They will eventually begin to pull away from the wall if the screws holding up the standards are not anchored into studs. The most sensible thing to do here is to drill the tonk strip adjustable shelving or the bookcase shelving strip or strip shelving directly into a stud if possible.

One must also have a clear idea about the lumber that needs to be purchased. Shelves are generally narrow at the top and wide at the bottom. They can be the other way round as well, with no hard and fast rule applicable. Shorter shelves must be long enough to reach two studs on the wall and in case you happen to be unsure about stud placement, it is advised that you find a stud finder to mark out the exact location of the studs in your wall. After determining the length of the shelves, they must be marked down on a piece of paper. Ideally, shorter ones are 32 inches long whereas longer ones are 48 inches long. As far as the length of the shelves on the shorter wall is concerned, you must proceed by subtracting the width of the shelf to account for where it eventually butts up against the edge of the shelf, on the other end of the corner.

In all probability, you will not be needing more than two standards for each side of the corner wall system, unless of course the shelf is longer than 64 inches. If the latter happens to be true, then it is recommended that three sets of standards and brackets be used. Once the shelves have been installed, the next obvious thing to do is to decorate them. You can start keeping all the books you want to on the shelves and arrange them according to color and size. Not only that, you can rearrange these shelf standards whenever you want and more shelves can be added and removed from the setup. To make the holiday season more exciting, you can add string lights to these for a festive, cozy feel and for the rest of the year, a lamp which lends light to this small yet noticeable corner of your living room.

x

High Quality Architectural Ironmongery

Questhardware.co.uk is an online store in the United Kingdom supplying high quality architectural ironmongery across the country. The most popular and sought after store supplies functional and well-crafted ironmongery to compliment building designs that allow both architects and contractors to specify from one source to give the entire project a smooth run in terms of accurate product use and on-time delivery within budget. Questhardware.co.uk works with architects and contractors on projects all over the UK to deliver solutions that incorporate the best ironmongery practices. All of Quest’s hardware such as drawer handles and knobs, hinges, door handles, tonk strip adjustable shelving, capex glazing system and various other fixtures and fittings are sourced from the best manufacturing companies across the world. The company also makes it a point to supply working sample blocks to clients and architects working on projects in order to let them visualize how the ironmongery will work even before the project gets underway. It is only after this that the actual goods are supplied.

In times when access and security have taken paramount importance at entrance and exit areas, architectural ironmongery by Quest hardware not only delivers on these accounts but also make the interiors stand out from the crowd. Not only that, the online store helps out with scheduling as well, with a a dedicated scheduling team handing out detailed schedules and key charts for all sorts of project types, be it new build or refurbishment contracts. In terms of scheduling, through some of the latest computerized scheduling systems, scheduling services delivered by quest hardware include hardware set schedules, schedules showing full product and technical descriptions, schedules showing fully itemized product summaries and quotations, key controls and master key charts and matrix schedules.

In terms of service and maintenance, the online store takes necessary measures to deliver the best to its clients as well as contractors. All architectural ironmongery is delivered to the site by the store’s own transport and also packed and labeled into door sets at no additional cost in order to match the ironmongery schedule produced. At the completion of each project, a fully detailed maintenance advice manual alongside master key charts, schedules, fixing instructions and details are handed over by the company to assist the end user in long term maintenance. The ironmongery is also supported with a manufacturer’s mechanical guarantee. The online store has the requisite experience and relevant product range to cater to expanding markets and meet client expectations, with a lot of work being handed over to the store on a repeat order basis. Because of this overwhelming success that quest hardware has seen over a period of time, it goes out of its way to support clients throughout all stages of the project, ranging from submitting sample blocks at the pre-scheduling stage to handing over the detailed master key schedule and also offering on-site technical assistance as well as facilitating general telephone enquiries. For all your architectural ironmongery needs, visit the website and identify the products you need and place an order.

Where to Find the Best Hardware Fixings and Fasteners

Questhardware is one of the foremost dealers of hardware fixings and fasteners across the United Kingdom. It has been supplying architectural ironmongery and building consumables to the construction and joinery trades for more than three decades now. With over 12,000 products available in stock and available for next day delivery, questhardware has solidified its position as the most bankable supplier of hardware items in the region. Potential buyers can go through the quest hardware catalogue in order to know more about the range of hardware products available on the site. The range includes highly durable and sustainable fixings and fittings such as wardrobe fixings, kitchen cabinet fixings, fixings & bolts, hardware fasteners etc.

Questhardware is arguably the most widely visited hardware shop in Buckingham for fixings and fasteners, with some of the most frequently bought items being woodscrews, self-drilling screws, nailing products, bolts, anchor fixings, wall fixings, wall plugs, packers and chemical anchors. Quest in Buckingham is where buyers find an entire range of screws such as Reisser R2 Cutter screws, Optimaxx Screws, Solo Countersunk Screws, Hinge Head Screws, Stainless Steel Screws, Twinthread Screws, Brass Screws, Carcase Screws and Chrome Screws. Quest ironmongery offerings include architectural signage, bathroom furniture, door bolts, door closers, door handles, door hinges, entrance door furniture, locks and latches etc. Further ironmongery offerings include cabinet knobs, door bolts, door knob sets, entrance door furniture, hat and coat hooks, hinges, latch sets, lever handles, pull handles etc.

Besides Quest fasteners, questhardware is also sought for its adhesive sealants such as general fillers, wood fillers, building compounds, wood preparation and contact adhesives. Some of the most widely bought adhesives at questhardware include PU adhesives, PVA adhesives, stixall adhesives, CT1 sealant adhesives, titebond adhesives, stronggrip and gripfill adhesives, schtuk extreme adhesives, super glues, flooring adhesives, cascamite adhesives, mirror adhesives and hot melt glue sticks. Questhardware in Buckingham has for the past so many years won the highest praise for its cabinet fittings that include assembly fittings, blum kitchen hinges, bolts and catches, cabinet handles, cabinet knobs, cabinet locks, cabinet stays, dowels, biscuits, pellets, drawer runners, drawers and timber, hinges, kitchen hinges and soft closes, kitchen storage and accessories, legs, castors and glides, shelving systems, sliding door fittings, trims and capping, wardrobe rail and fittings etc.

Despite all the success that the company has seen for such a long time, it continues with its endeavors of adding new products to its existing range. Even the existing ones are always being updated and improved upon. Questhardware’s online store has improved by leaps and bounds The company has invested in making its online store better on a continuous basis to deliver superior customer experiences. Newly added and improved features include buying lists, access to special prices, viewing account balance and much more. The company now offers a 24 hour delivery service in and around the United Kingdom to ensure buyers are constantly getting their goods on time. All the catalogue items are generally carried in stock in order to deliver goods that have been ordered on a priority basis by customers. Questhardware has constantly made efforts to increase its warehouse stock and has purchasing teams working on it day n and day out to increase and improve stock levels and in-house stock profile to ensure that products sought by customers are always there and are delivered fast and on time.

The new online store gives customers access to all previously purchased items, special prices, invoices and onsite ordering from one central hub. Whether you happen to be based in or around Buckingham or for that matter anywhere within the UK and are in need of hardware items, durable fixings and fittings, questhardware.co.uk is always there to ensure your needs are taken care of.